Matrix display ANZ-32 and ANZ-132
The ANZ-32 series is a matrix display consisting of a mainboard, two LED matrix blocks, and an LED display panel. The digit height is 30mm. The ANZ-32 matrix display is a passive unit and requires the DAVID control system for operation.
When the ANZ-32 matrix board is connected to the PIC-111 processor board, it becomes the ANZ-132 matrix display, which can be used with any elevator control system. It provides 14 inputs for cabin position visualization, up and down arrows, as well as scrolling text.
Two different matrix panels are available for the ANZ-32 and ANZ-132 matrix displays.
The display panel for the ANZ-32 has a visible area of 50 x 50 mm (W x H) and is available in gray.
| Name of the assembly group: | ANZ-32 or ANZ-132 |
|---|---|
| Use function: | The ANZ-32 and ANZ-132 matrix displays can show characters and arrows with a height of 30mm. |
| Time of use: | From 2007 |
| Dimensions (with shell): | 68 x 47 mm |
| Display section: | 50.0 mm x 30.0 mm |
| Weight: | Approx. 200 gram |
| Power supply: | Terminals 200 - 24V DC
Terminals 500 - 0V GND |
| Cover case: | Made of gray Plexiglas, suitable for front panel thickness of 2mm |
| Protection level: | IP 21 / Pollution degree II |
| Place of installation: | Behind the control panel |
| Ambient temperature: | 0 to +65 °C |
| Control unit: | KW matrix bus; with PIC-111: Parallel 1-out-of-N, Binary, Gray code |
| KW-Number: | 1001015 |