ER-2014-A Floor Controller
The floor controller ER-2014-A provides 16 inputs and outputs, of which 6 are freely configurable, two piezo buzzer outputs for call acknowledgment, 8 outputs for controlling floor indicators, 4 outputs for floor gong speakers, as well as the connection option for two bus matrix displays and 1x RJ-12 for TFT graphic displays.
All necessary call inputs, as well as arrow outputs, even for selective door control, are available.
The floor controller is mounted in the shaft cable channel. The blue RJ-45 cable and a power cable are used for the bus connection. The lower 7-pin connector with the call lines 2xA & 2xB is intended for door side 1, the upper connector with 2xC & 2xD for door side 2.
The matrix displays are connected using the RJ-12 cable in the two black sockets.
The yellow-marked RJ-12 socket is for high-quality TFT graphic displays with KW bus connection.
New software to control the output driver ICs of type TLE75080. The software automatically detects which floor controller it is.
Usable for all variants!
External protection diodes are no longer required!
Transil protection diodes are already installed.
No residual voltage when the output is set to "0".
Control of the LED matrix display has been optimized.
| Name of the assembly group: | ER-2014-A |
|---|---|
| Use function: | The floor controller ER-2014-A provides 16 inputs and outputs, as well as the possibility to connect two bus matrix displays and 1x RJ-12 for TFT graphic displays. All necessary call inputs, as well as arrow outputs, even for selective door control, are available. |
| Obsolete component: | ER-2014 |
| Time of use: | From 2022 |
| Relay elements: | None |
| Dimensions (with shell): | (length x width x height) 203 mm x 46 mm x 30 mm |
| Weight: | Approx. 300 gram |
| Power supply: | Terminals 200 - 24V DC
Terminals 500 - 0V GND |
| Switching cycles: | None |
| Protection level: | IP 43 / Pollution degree II |
| Place of installation: | In the elevator shaft - cable channel |
| Ambient temperature: | 0 to +45 °C |
| KW-Number: | 1100158 |
ER-2014-A Terminals – Functions:
