ER-2013-A Floor Controller
The ER-2013-A floor controller offers 16 inputs and outputs, of which 6 inputs and outputs are freely assignable, two piezo buzzer outputs for call acknowledgment, 8 outputs for controlling floor indicators, 4 outputs for floor bell speakers, as well as the possibility to connect two bus matrix displays and 1x RJ-12 for TFT graphic displays.
All necessary call inputs, as well as arrow outputs, even for selective door control, are available.
The floor controller is mounted in the shaft cable channel. The connection cable for the bus is the blue RJ-45 cable and a power cable. The lower 7-pin connector with the call lines 2xA & 2xB is intended for Door side 1, while the upper connector with 2xC & 2xD is for Door side 2. The matrix displays are connected using the RJ-12 cable inserted into the two black sockets. The yellow marked RJ-12 socket is for high-quality TFT graphic displays with KW bus connection.
Difference to the ER-2013:
New software to control the output driver ICs of the type TLE75080. The software automatically recognizes which floor controller it is. Usable for all variants!
External protection diodes are no longer required!
Transil protection diodes are already built-in.
No residual voltage when the output is set to "0".
Control of the LED matrix display has been optimized.
| Name of the assembly group: | ER-2014-A |
|---|---|
| Use function: | The floor controller ER-2014-A provides 16 input and output terminals, as well as the possibility to connect two bus-matrix displays and one RJ-12 for TFT graphic displays. All necessary call inputs, as well as arrow outputs, even for selective door controls, are available. |
| Obsolete component: | ER-2014 |
| Time of use: | From 2022 |
| Relay elements: | None |
| Dimensions (with shell): | (length x width x height) 130 mm x 46 mm x 30 mm |
| Weight: | Approx. 200 gram |
| Power supply: | Terminals 200 - 24V DC
Terminals 500 - 0V GND |
| Switching cycles: | None |
| Protection level: | IP 43 / Pollution degree II |
| Place of installation: | In the elevator shaft - cable duct |
| Ambient temperature: | 0 to +45 °C |
| KW-Number: | 1100157 |
ER-2013-A Terminals – Functions:
