EIT-102-M Internal Panel Circuit Board
| Name of the assembly group: | EIT-102-M |
|---|---|
| Use function: | The EIT-102-M module is installed behind the internal panel and is connected to the lift controller (FKR) via a 34-pin internal panel cable. The push buttons are connected via 4-pin cables with Molex connectors. |
| Obsolete component: | EIT-101-M |
| Time of use: | From 2007-12 to 2016-04 / Still standard for control panels |
| Relay elements: | K30 |
| Dimensions (with shell): | (length x width x height) 110 mm x 40 mm x 30 mm |
| Weight: | Approx. 250 gram |
| Power supply: | Klemmen 200 - 24V DC
Klemmen 500 - 0V GND |
| Switching cycles: | 1,000,000 |
| Protection level: | IP 43 / Pollution degree II |
| Place of installation: | Rear side of the internal panel |
| Ambient temperature: | 0 bis +65 °C |
| KW-Number: | 1100042 |