DBA90-101 - Converter DAVID-606 to KW-Display-Bus
| Name of the assembly group: | DBA90-101 |
|---|---|
| Use function: | The DBA90-101 converter converts the information from the cabin bus to the KW Displaybus information, allowing a TFT display to operate in bus mode. |
| Time of use: | From 2014 to 2015 |
| Dimensions (with shell): | 77 x 44 mm |
| Weight: | Approx. 150 gram |
| Power supply: | Terminals 200 - 24V DC
Terminals 500 - 0V GND |
| Cover case: | Shell from ER-2013 |
| Protection level: | IP 21 / Pollution degree II |
| Place of installation: | Behind the control panel |
| Ambient temperature: | 0 to +45 °C |
| Control unit: | KW-Displaybus |
| KW-Number: | 1001056 |
Warning!
Before operating on the shaft or cabin bus, the DBA90 must be configured using a PC program.
To do this, both jumpers on the DBA90 must be set first. Then, connect the DBA90 to the PC using an RS232 cable or a USB/RS232 adapter, and run the PC program.